Updates to the firmware are regarded as a godsend since they give WiFi routers the capacity to function properly and the newest capabilities. Having said that, many consumers would rather update the firmware on their Netgear router as soon as a new version is released. Just 40% of them were effective. The remaining 60%, however, lament that after the firmware upgrade, they are still unable to use their Netgear router. Some even report experiencing the problem of
routerlogin.net not functioning.
After a firmware upgrade, are you also having trouble login into your WiFi router? If so, reading this post through will be helpful. Most people have found success with the hacks we’ve included here, and we hope you’ll find them useful as well. That said, continue reading.
Unable to Log in to Netgear Router After Firmware Update? Issue Resolved
- Empty the Cache in the Browser
A cached version of the browser is the main cause of your inability to log in to the Netgear router after the firmware upgrade. Just so you know, all browsers utilize cookies to make websites work better, and your browser is no exception. It’s possible that your browser has cached your WiFi router’s admin page, which is why you’re having trouble signing in.
Therefore, without thinking twice, delete the cookies and cache that are saved in the online browser. You may use the browser’s Settings tool to accomplish this. Hard-refreshing the web browser is another technique that might help you with this. Other than that, try opening the web browser again or using a different one to log into the router.
2
Verify Your Internet Connection
The router reboots during and after a firmware update, and there is no internet connectivity at that time. It is likely that you are trying to access your WiFi router during that particular time. Therefore, all we advise you to do is give it some time and wait for a good WiFi router reset. If the issue persists, try restarting the router’s power supply.
In addition, see how the Netgear WiFi router and modem’s LAN connection are doing. The reason for this is that consumers are advised to use a wired connection to complete the firmware upgrade procedure, and WiFi devices are then separated when the process is over. It’s possible that their relationship has loosened as a result of that practice. If so, try connecting to the router as tightly as possible and attempt logging in.
- Turn Off Your Antivirus Briefly
During the firmware upgrade, did you temporarily turn off the antivirus software installed on your computer? Not at all? However, it’s not always the case that an antivirus software interferes with the router’s administration procedure. However, this truth cannot be disregarded.
In light of this, check to see whether an antivirus program is preventing you from accessing the
routerlogin net website. Should that be the case, you must use your computer’s Control Panel to temporarily disable it.
- Do a router reset.
The moment to use the ultimate hack is almost here if turning off the antivirus software doesn’t help you solve the issue either. Put another way, give your WiFi router a factory reset. To accomplish this, press and hold the WiFi router’s reset button. It must be completed with extreme caution.
After your WiFi router has been restored to its original factory settings, you may use the Nighthawk mobile app or the online URL to configure it once again.
To Sum Up
All of this has to do with what to do following a firmware update if you are unable to log in to your Netgear WiFi router. We’re hoping that you’ll be able to fix the issue quickly after wiping the WiFi router.
But remember to update your router’s firmware once more. While doing this, keep in mind that updating the incorrect firmware file or stopping the process midway might cause your router to brick once more. Therefore, attend to the same and then continue with your networking.
