The appearance of the color orange on the LED light of the Netgear extender can be irritating. It is because it only signifies that there is a poor internet connection which can further result in the Netgear WiFi not working issue. Are you also irritated by the same problem? Well, no need to worry now. All you have to do is follow the tactics given in this post to know how to resolve the issue.
First of All: Fix the Extender-Router Connection
You are first required to pay a little attention to the connection you have made between the range extender and the router. It has been observed many times that the orange light on the Nighthawk range extender appears because of the weak connection between the aforementioned devices. You are required to apply a specific workaround depending on the source of connecting your devices.
Thus, if you have connected them using a wireless source, take a look at the gap between them. Have you kept these devices in the two farthest rooms of the house? If yes, then you need to bring them in the same room because they might not be communicating causing the Netgear extender orange light issue. But, be sure not to place them very close. Their signals may get involved in a conflict.
The second case is of the wired connection in which the entire troubleshooting needs to be done on the cable in use. It must be non-damaged at every cost. If you keep using a damaged one then signal propagation may be affected. We also recommend you pay heed to the ports to which you have connected the cable. It must be the LAN port of the main gateway whereas the Internet port of the range extender. But, if you keep facing the orange light issue even after performing a workaround on the extender and router connection, check out the next section.
Fixed: Orange Light on Netgear Extender
-
Check the Power Source
You are now required to move to the socket to which you have connected the range extender for power. Is it non-damaged? In case it is not, then you’ve just spotted a cause why the orange light has shown up on the range extender. To do away with such a power problem, we suggest you connect the range extender to the wall socket that is capable of supplying non-fluctuating power. You can take the aid of a UPS in case your area suffers power outages regularly.
-
Change the Extender’s Location
Perhaps, you’ve placed your extender in an area where it gets affected by direct sunlight. Know that when the extender is exposed to similar heat sources, its ability to connect to the internet is affected and you might face other issues related to its performance. Therefore, you should relocate the extender and keep it in a cool and airy location. If possible, then we suggest you keep the extender away from sources emitting electromagnetic waves and reflective surfaces. Moreover, do not place metal utensils near the extender.
-
Restart the Extender
Sometimes, a simple restart can do what major techniques cannot do. Thus, we advise you to restart your range extender. Perhaps, it is just a network glitch due to which you are seeing the orange light on your WiFi device. To restart the range extender properly, you need to keep it powered down for 10 to 15 minutes. If possible, restart your wireless router too. But, if you go for this option, then consider powering down the router before the extender. If you fail to troubleshoot the issue, then perform the Netgear Nighthawk extender setup again.
The Bottom Line
That’s it! This was all about what to do if you’re seeing the orange light on your Netgear extender. We hope that after you reset the extender and set it up again from scratch, you will be able to get rid of the orange light easily. Thanks for reading the post!
